Metric tire size

255/80R17 tire size

A 255/80R17 tire is 33.1 inches (840 mm) tall and 10.0 in wide, for a 17-inch wheel, with a 8.0 in sidewall. That is the nominal size worked out from the code. Makers publish 33–33.31 in for real 255/80R17 tires (5 makers).

Diameter33.1 in840 mm

Width10.0 in255 mm

Sidewall8.0 in204 mm

Revs per mile610nominal, published 624–633

Wheel width6.5–8.5 inapproved by every listing

Compare 255/80R17 with other sizes

Your current size

Current tire size

e.g. 265/70R17, 2657017 or 33x12.50R20

Where do I find my size?

It's on the tire sidewall, e.g. P265/70R17 115T, and on the tire placard sticker on the driver's door jamb (also in the owner's manual). If your current tires aren't the original size, the placard shows what the vehicle came with. Digits are enough here: 2657017 or 33125020.

Size you're considering

Size you're considering (2)

Real 255/80R17 tires: published diameters

Figures from the makers' own data books. They differ from the 33.1 in calculated figure because each tread design and construction measures slightly differently.

Maker (data book)	Published diameter	Revs per mile	Approved wheel width	Listings
Falken	33–33.3 in	627–632	6.5–8.5 in	2
Goodyear	33.3 in	624	6.5–8.5 in	1
Hankook	33 in	633	6.5–8.5 in	1
Nitto	33.07–33.31 in	—	6.5–8.5 in	2
Toyo	33.1–33.3 in	624–628	6.5–8.5 in	2

Sources: maker data books (PDF), checked 2026-11-05. Brand names identify the data source only.

Equivalent sizes on other wheels

Sizes that appear in the maker data books with a diameter within 3% of 255/80R17. Same diameter is only one part of fitting a different size.

Wheel	Real sizes within 3% (closest first)
15-inch	33x10.50R15 (33.0 in, −0.2%), 33x12.50R15 (33.0 in, −0.2%), 33x13.50R15 (33.0 in, −0.2%)
16-inch	255/85R16 (33.1 in, ±0.0%), 285/75R16 (32.8 in, −0.7%), 305/70R16 (32.8 in, −0.8%)
17-inch	33x11.50R17 (33.0 in, −0.2%), 33x12.50R17 (33.0 in, −0.2%), 295/70R17 (33.3 in, +0.6%)
18-inch	295/65R18 (33.1 in, +0.1%), 33x11.50R18 (33.0 in, −0.2%), 33x12.50R18 (33.0 in, −0.2%)
20-inch	33x11.50R20 (33.0 in, −0.2%), 33x12.50R20 (33.0 in, −0.2%), 275/60R20 (33.0 in, −0.2%)
22-inch	33x12.50R22 (33.0 in, −0.2%), 315/45R22 (33.2 in, +0.3%), 355/40R22 (33.2 in, +0.4%)

Popular comparisons with 255/80R17

255/80R17 vs 285/70R17−1.1% diameter

FAQ

How tall is a 255/80R17 tire?

33.1 inches (840 mm) calculated from the size code. Makers publish 33–33.31 in for real tires in this size; the difference comes from tread design and construction.

How do you work out the 255/80R17 diameter?

Sidewall = 255 mm × 80% = 204.0 mm. Diameter = 17 in wheel + 2 × 204.0 mm ÷ 25.4 = 33.06 in.

Is 255/80R17 a 33-inch tire?

It is about 33.1 in tall nominally, so it is close to 33 inches. Real tires in a size vary slightly by model; check the maker's spec sheet for the exact tire.

What sizes are equivalent to 255/80R17?

Real sizes within 3% of its diameter include 255/85R16 (±0.0%), 295/65R18 (+0.1%) and 33x11.50R20 (−0.2%). Equal diameter alone doesn't make a size suitable: wheel width, offset, clearance and load rating all matter.

How many revolutions per mile does a 255/80R17 make?

About 610 calculated from its unloaded diameter. Makers publish 624–633 revs per mile, measured under load (a loaded tire rolls on a slightly smaller radius), which is why published figures are higher.

Open 255/80R17 in the converter · Tire size chart · 33-inch tires

Important: These are calculated (nominal) dimensions, not a fitment recommendation. Real tires of the same size differ by brand and model (makers allow about ±3% of section height), and width changes with the rim it is mounted on. The math can't see wheel width and offset, clearance at full steering lock and suspension travel, load index, speed rating, or what your vehicle maker approves. Before changing size, check your door-jamb placard and owner's manual and ask a tire professional. A replacement tire must meet or exceed the load index and speed rating on the placard.