Metric tire size

255/70R18 tire size

A 255/70R18 tire is 32.1 inches (814 mm) tall and 10.0 in wide, for a 18-inch wheel, with a 7.0 in sidewall. That is the nominal size worked out from the code. Makers publish 32–32.17 in for real 255/70R18 tires (6 makers).

Diameter32.1 in814 mm

Width10.0 in255 mm

Sidewall7.0 in178 mm

Revs per mile629nominal, published 647–658

Wheel width6.5–8.5 inapproved by every listing

Compare 255/70R18 with other sizes

Your current size

Current tire size

e.g. 265/70R17, 2657017 or 33x12.50R20

Where do I find my size?

It's on the tire sidewall, e.g. P265/70R17 115T, and on the tire placard sticker on the driver's door jamb (also in the owner's manual). If your current tires aren't the original size, the placard shows what the vehicle came with. Digits are enough here: 2657017 or 33125020.

Size you're considering

Real 255/70R18 tires: published diameters

Figures from the makers' own data books. They differ from the 32.1 in calculated figure because each tread design and construction measures slightly differently.

Maker (data book)	Published diameter	Revs per mile	Approved wheel width	Listings
BFGoodrich	32.1 in	648	6.5–8.5 in	1
Falken	32.1 in	658	6.5–8.5 in	1
Goodyear	32.1 in	648–651	6.5–8.5 in	2
Hankook	32–32.1 in	647–648	6.5–8.5 in	3
Nitto	32.09–32.17 in	—	6.5–8.5 in	2
Toyo	32.1 in	647	6.5–8.5 in	1

Sources: maker data books (PDF), checked 2026-11-05. Brand names identify the data source only.

Equivalent sizes on other wheels

Sizes that appear in the maker data books with a diameter within 3% of 255/70R18. Same diameter is only one part of fitting a different size.

Wheel	Real sizes within 3% (closest first)
15-inch	32x11.50R15 (32.0 in, −0.2%), 32x9.50R15 (32.0 in, −0.2%), 33x10.50R15 (33.0 in, +2.9%)
16-inch	235/85R16 (31.7 in, −1.0%), 285/70R16 (31.7 in, −1.1%), 265/75R16 (31.6 in, −1.3%)
17-inch	255/75R17 (32.1 in, ±0.0%), 275/70R17 (32.2 in, +0.3%), 315/60R17 (31.9 in, −0.5%)
18-inch	275/65R18 (32.1 in, +0.1%), 305/60R18 (32.4 in, +1.1%), 265/65R18 (31.6 in, −1.5%)
20-inch	255/60R20 (32.0 in, ±0.0%), 305/50R20 (32.0 in, −0.1%), 275/55R20 (31.9 in, −0.5%)
22-inch	285/45R22 (32.1 in, +0.1%), 275/45R22 (31.7 in, −1.0%), 265/50R22 (32.4 in, +1.2%)

FAQ

How tall is a 255/70R18 tire?

32.1 inches (814 mm) calculated from the size code. Makers publish 32–32.17 in for real tires in this size; the difference comes from tread design and construction.

How do you work out the 255/70R18 diameter?

Sidewall = 255 mm × 70% = 178.5 mm. Diameter = 18 in wheel + 2 × 178.5 mm ÷ 25.4 = 32.06 in.

Is 255/70R18 a 32-inch tire?

It is about 32.1 in tall nominally, so it is close to 32 inches. Real tires in a size vary slightly by model; check the maker's spec sheet for the exact tire.

What sizes are equivalent to 255/70R18?

Real sizes within 3% of its diameter include 235/85R16 (−1.0%), 255/75R17 (±0.0%) and 255/60R20 (±0.0%). Equal diameter alone doesn't make a size suitable: wheel width, offset, clearance and load rating all matter.

How many revolutions per mile does a 255/70R18 make?

About 629 calculated from its unloaded diameter. Makers publish 647–658 revs per mile, measured under load (a loaded tire rolls on a slightly smaller radius), which is why published figures are higher.

Open 255/70R18 in the converter · Tire size chart · 32-inch tires

Important: These are calculated (nominal) dimensions, not a fitment recommendation. Real tires of the same size differ by brand and model (makers allow about ±3% of section height), and width changes with the rim it is mounted on. The math can't see wheel width and offset, clearance at full steering lock and suspension travel, load index, speed rating, or what your vehicle maker approves. Before changing size, check your door-jamb placard and owner's manual and ask a tire professional. A replacement tire must meet or exceed the load index and speed rating on the placard.