Metric tire size

255/55R20 tire size

A 255/55R20 tire is 31.0 inches (788 mm) tall and 10.0 in wide, for a 20-inch wheel, with a 5.5 in sidewall. That is the nominal size worked out from the code. Makers publish 30.7–31.02 in for real 255/55R20 tires (5 makers).

Diameter31.0 in788 mm

Width10.0 in255 mm

Sidewall5.5 in140 mm

Revs per mile650nominal, published 670–680

Wheel width7–9 inapproved by every listing

Compare 255/55R20 with other sizes

Your current size

Current tire size

e.g. 265/70R17, 2657017 or 33x12.50R20

Where do I find my size?

It's on the tire sidewall, e.g. P265/70R17 115T, and on the tire placard sticker on the driver's door jamb (also in the owner's manual). If your current tires aren't the original size, the placard shows what the vehicle came with. Digits are enough here: 2657017 or 33125020.

Size you're considering

Real 255/55R20 tires: published diameters

Figures from the makers' own data books. They differ from the 31.0 in calculated figure because each tread design and construction measures slightly differently.

Maker (data book)	Published diameter	Revs per mile	Approved wheel width	Listings
Falken	31 in	680	7–9 in	1
Goodyear	31 in	673–674	7–9.5 in	2
Hankook	30.7–30.9 in	673–675	7–9 in	2
Nitto	31.02 in	—	7–9 in	1
Toyo	31 in	670	7–9 in	1

Sources: maker data books (PDF), checked 2026-11-05. Brand names identify the data source only.

Equivalent sizes on other wheels

Sizes that appear in the maker data books with a diameter within 3% of 255/55R20. Same diameter is only one part of fitting a different size.

Wheel	Real sizes within 3% (closest first)
15-inch	31x10.50R15 (31.0 in, −0.1%), 265/75R15 (30.6 in, −1.3%)
16-inch	275/70R16 (31.2 in, +0.4%), 265/70R16 (30.6 in, −1.4%), 245/75R16 (30.5 in, −1.9%)
17-inch	255/70R17 (31.1 in, ±0.0%), 275/65R17 (31.1 in, +0.1%), 235/75R17 (30.9 in, −0.5%)
18-inch	255/65R18 (31.1 in, ±0.0%), 275/60R18 (31.0 in, −0.2%), 285/60R18 (31.5 in, +1.4%)
20-inch	235/60R20 (31.1 in, +0.2%), 285/50R20 (31.2 in, +0.6%), 275/50R20 (30.8 in, −0.7%)
22-inch	255/45R22 (31.0 in, ±0.0%), 285/40R22 (31.0 in, −0.2%), 325/35R22 (31.0 in, −0.3%)

FAQ

How tall is a 255/55R20 tire?

31.0 inches (788 mm) calculated from the size code. Makers publish 30.7–31.02 in for real tires in this size; the difference comes from tread design and construction.

How do you work out the 255/55R20 diameter?

Sidewall = 255 mm × 55% = 140.2 mm. Diameter = 20 in wheel + 2 × 140.2 mm ÷ 25.4 = 31.04 in.

Is 255/55R20 a 31-inch tire?

It is about 31.0 in tall nominally, so it is close to 31 inches. Real tires in a size vary slightly by model; check the maker's spec sheet for the exact tire.

What sizes are equivalent to 255/55R20?

Real sizes within 3% of its diameter include 275/70R16 (+0.4%), 255/70R17 (±0.0%) and 255/65R18 (±0.0%). Equal diameter alone doesn't make a size suitable: wheel width, offset, clearance and load rating all matter.

How many revolutions per mile does a 255/55R20 make?

About 650 calculated from its unloaded diameter. Makers publish 670–680 revs per mile, measured under load (a loaded tire rolls on a slightly smaller radius), which is why published figures are higher.

Open 255/55R20 in the converter · Tire size chart · 31-inch tires

Important: These are calculated (nominal) dimensions, not a fitment recommendation. Real tires of the same size differ by brand and model (makers allow about ±3% of section height), and width changes with the rim it is mounted on. The math can't see wheel width and offset, clearance at full steering lock and suspension travel, load index, speed rating, or what your vehicle maker approves. Before changing size, check your door-jamb placard and owner's manual and ask a tire professional. A replacement tire must meet or exceed the load index and speed rating on the placard.