Metric tire size

245/35R20 tire size

A 245/35R20 tire is 26.8 inches (680 mm) tall and 9.6 in wide, for a 20-inch wheel, with a 3.4 in sidewall. That is the nominal size worked out from the code. Makers publish 26.6–26.9 in for real 245/35R20 tires (7 makers).

Diameter26.8 in680 mm

Width9.6 in245 mm

Sidewall3.4 in86 mm

Revs per mile754nominal, published 771–782

Wheel width8–9.5 inapproved by every listing

Compare 245/35R20 with other sizes

Your current size

Current tire size

e.g. 265/70R17, 2657017 or 33x12.50R20

Where do I find my size?

It's on the tire sidewall, e.g. P265/70R17 115T, and on the tire placard sticker on the driver's door jamb (also in the owner's manual). If your current tires aren't the original size, the placard shows what the vehicle came with. Digits are enough here: 2657017 or 33125020.

Size you're considering

Size you're considering (2)

Real 245/35R20 tires: published diameters

Figures from the makers' own data books. They differ from the 26.8 in calculated figure because each tread design and construction measures slightly differently.

Maker (data book)	Published diameter	Revs per mile	Approved wheel width	Listings
BFGoodrich	26.7 in	777	8–9.5 in	1
Falken	26.8–26.9 in	771–774	8–9.5 in	2
Goodyear	26.8 in	781	8–9.5 in	1
Hankook	26.6 in	780–782	8–9.5 in	2
Nitto	26.77 in	—	8–9.5 in	1
Toyo	26.8 in	776	8–9.5 in	1
Uniroyal	26.7 in	777	8–9.5 in	1

Sources: maker data books (PDF), checked 2026-11-05. Brand names identify the data source only.

Equivalent sizes on other wheels

Sizes that appear in the maker data books with a diameter within 3% of 245/35R20. Same diameter is only one part of fitting a different size.

Wheel	Real sizes within 3% (closest first)
15-inch	215/70R15 (26.9 in, +0.4%), 295/50R15 (26.6 in, −0.5%), 245/60R15 (26.6 in, −0.7%)
16-inch	225/60R16 (26.6 in, −0.5%), 215/65R16 (27.0 in, +0.9%), 205/65R16 (26.5 in, −1.0%)
17-inch	225/55R17 (26.7 in, ±0.0%), 245/50R17 (26.6 in, −0.4%), 255/50R17 (27.0 in, +1.1%)
18-inch	245/45R18 (26.7 in, −0.3%), 315/35R18 (26.7 in, −0.3%), 275/40R18 (26.7 in, −0.3%)
20-inch	285/30R20 (26.7 in, −0.1%), 345/25R20 (26.8 in, +0.1%), 295/30R20 (27.0 in, +0.8%)
22-inch	235/30R22 (27.6 in, +3.0%)

Popular comparisons with 245/35R20

245/35R20 vs 255/35R20+1.0% diameter

FAQ

How tall is a 245/35R20 tire?

26.8 inches (680 mm) calculated from the size code. Makers publish 26.6–26.9 in for real tires in this size; the difference comes from tread design and construction.

How do you work out the 245/35R20 diameter?

Sidewall = 245 mm × 35% = 85.8 mm. Diameter = 20 in wheel + 2 × 85.8 mm ÷ 25.4 = 26.75 in.

Is 245/35R20 a 27-inch tire?

It is about 26.8 in tall nominally, so it is close to 27 inches. Real tires in a size vary slightly by model; check the maker's spec sheet for the exact tire.

What sizes are equivalent to 245/35R20?

Real sizes within 3% of its diameter include 225/60R16 (−0.5%), 225/55R17 (±0.0%) and 245/45R18 (−0.3%). Equal diameter alone doesn't make a size suitable: wheel width, offset, clearance and load rating all matter.

How many revolutions per mile does a 245/35R20 make?

About 754 calculated from its unloaded diameter. Makers publish 771–782 revs per mile, measured under load (a loaded tire rolls on a slightly smaller radius), which is why published figures are higher.

Open 245/35R20 in the converter · Tire size chart

Important: These are calculated (nominal) dimensions, not a fitment recommendation. Real tires of the same size differ by brand and model (makers allow about ±3% of section height), and width changes with the rim it is mounted on. The math can't see wheel width and offset, clearance at full steering lock and suspension travel, load index, speed rating, or what your vehicle maker approves. Before changing size, check your door-jamb placard and owner's manual and ask a tire professional. A replacement tire must meet or exceed the load index and speed rating on the placard.